![]() ![]() Once the system is successfully updated, the BHT is automatically full-reset (cold booted). The message appears and the system update begins Check that the version of the system program you want to update is indicated.Open the folder in which the system program is saved and double-click. ![]() Start up Windows Explorer on the PC and save the following files into a sub-folder under the directory of the BHT.On the BHT side, the following screen appears and the BHT is connected via ActiveSync. Press the power key to turn on the BHT.Load the fully-charged battery to the BHT.Connect the cradle to the PC and place the BHT on that cradle.Install ActiveSync ® (or Windows Mobile Device Center) on your PC.You are required to download and then decompress the system program files supported by the BHT. Or Microsoft ® Windows Mobile Device Center if you use Windows Vista or Windows 7 To use the BHT, you should wait until the update is completed. The power cannot be cut off even with the power key during the update process (while the system software is being written onto the flash memory).Or, place the BHT on the CU when updating the system. To prevent the battery from running out of power in the middle of the update, make sure that the battery is sufficiently charged.For more details on the data backup, refer to the User’s Manual or visit here. You should back up the critical data before you start updating. All the data and the registries stored in the RAM are initialized when the system (OS) is updated.Technical Information Update the BHT-1200-CE/BHT-1100-CE system (OS) using ActiveSync or Windows Mobile Device Center Read this first Update the system (OS) using ActiveSync/Windows Mobile Device Center. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |